Jump to content
Do Not Sell My Personal Information


  • Join Toyota Owners Club

    Join Europe's Largest Toyota Community! It's FREE!

     

Hilux Electrical Gearbox Problem


Rich_28
 Share

Recommended Posts

I have just bought a 1994 Toyota Hilux Surf 3 Litre diesel. It has two problems, when I select 2nd gear position it blows the fuse for the overdrive, heater and dash gauges, but is ok low drive and reverse.

Also on the road, overdrive or 4th gear doesn't come in, all the button does is turn the light on and off on the dashboard. It is running in 3rd gear at about 58 miles an hour at 3000 rpm.

Any ideas and relay? ECU? Overdrive Solenoid? Please help. Desperate.

Cheers,

Richard

Link to comment
Share on other sites

  • 1 month later...

I have just bought a 1994 Toyota Hilux Surf 3 Litre diesel. It has two problems, when I select 2nd gear position it blows the fuse for the overdrive, heater and dash gauges, but is ok low drive and reverse.

Also on the road, overdrive or 4th gear doesn't come in, all the button does is turn the light on and off on the dashboard. It is running in 3rd gear at about 58 miles an hour at 3000 rpm.

Any ideas and relay? ECU? Overdrive Solenoid? Please help. Desperate.

Cheers,

Richard

My last 4wd was a 94 auto td 3.0 1kzte import surf from japan. At about 130k it would no longer go in to over drive. I was told by a trans specialist that it was water damage to the internals, an a few others looked at it and had no idea.

Out of desperation I went through all the plugs on the wiring harness and on the trans and found 1 of the electrical conecters on the side of the trans had a coroded pin, that was broken away . I ended up drilling a small hole through the plug and solderd two new wires to the ones in the trans , after removing the pan and solderd them to the wires on the outside , doing away withe plug. I used a hi temp silicone to insulate the joins inside and to seal the new hole.

This fixed the problem and it was engaging over drive again like new. :D

I belive the corosion occured because there was no sign of any water proofing grease or anti corosive protection of any kind in the electrical plugs, and from washing the drive train with pressure cleaners and cleaning chemicals.

This info may not solve your problems but i hope it gives you some ideas where to look . GOOD LUCK.

Link to comment
Share on other sites

Latest Deals

Toyota Official Store for genuine Toyota parts & accessories

Disclaimer: As the club is an eBay Partner, The club may be compensated if you make a purchase via eBay links

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share







×
×
  • Create New...




Forums


News


Membership