Backwindow Regulatior

[irishgerard]

Hi guys im after the runner for the back window as mine is sticking... i replaced the motor so im guessing its the regulator that the glass is attached to.

Thanks

[Vince W]

You can get new ones from here...

http://www.roughtrax4x4.com/?doc=16&cid=717&vid=906

But try greasing the moving parts of yours first, and get some rubber lubricant or silicone spray and apply to everywhere the glass touches.

http://www.edirectory.co.uk/pf/880/mia/d/h...cant/pid/439240

[swampdog]

I totally agree with Bushwhacker,take yours apart first and grease it. just be careful at the last moment of freeing the glass,as one wrong move will mean the end of it because of the leaverage.i done mine myself when i had a surf but i could've done with an extra pair of hands.The runner can be a bit of a swine to get out,but with a little logic and a bit more patience it's easy enough.Whilst your in there check the condition of the vulcanised rubber mount with two lugs on it,conecting to the motor(i think thats where it is,it was a while ago now)cause if it's been straining itself they tend to sheer.I reinforced mine with two tapered headed screws(and some super glue,cause mine totally sheered and i was too tight to buy a new one)never broke again though.