Jump to content
Do Not Sell My Personal Information


No Boost On My Celica Gt4 St205


pikey009
 Share

Recommended Posts

hi can anyone help me please! went to drive my car back from my army camp and it had been working fine in the morning. obviously i let it warm up before i give it any kind of boost, at least 1/4 up the temp guage. the car was warm and i put my foot down. there was hardly any power with the boost going to 0 wich is vaccum pressuer i believe. theres a strange whining noise aswell.

ive had the turbo off and its all fine, there was however a little oil in the induction pipe but not much. ive checked all the vaccum and boost hoses and they seem fine. in a nutshell im running a motec m4 pro ecu with 1.1bar boost, 3inch exhaust from the turbo with 2.5inch restrictor so its not overboosting and a few other bits but theyv all been on for at least 6 months with no problems.

so all i can think of is maybe the actuator or a sensor or something. can anyone shed any light or give me any contacts please thanks

Link to comment
Share on other sites

have you checked the exhaust turbine on the turbo as they are a common fault for snapping off

Try blowing into the actuator vacuum hose. If you can you've got an air leak.

Link to comment
Share on other sites

check the waste gate actuator. sometimes they pop off. this happened to me once

pop off?

Link to comment
Share on other sites


check the waste gate actuator. sometimes they pop off. this happened to me once

pop off?

it happened to me in my 850, the actuator rod popped off of the waste gate. it was a really easy fix, just shortened the actuator 1 and a half turns and popped it back on. hasn't happened again since.

Link to comment
Share on other sites

Whining?

Sounds like turbo bearing to me...

but check first for a boost leak as even a dying whining tubro should make more than 0 boost.

Link to comment
Share on other sites

  • 6 years later...

Hello..I've just bought gt4 same issue...ie no boost at all..new refurbed turbo,new de cat pipe,K& n induction kit...all std block etc..new gaskets all round genuine from my dealer...turbo is spinning fine..but no boost...

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share





×
×
  • Create New...




Forums


News


Membership