Jump to content
Do Not Sell My Personal Information


Uncle Bob

Established Member
  • Posts

    1,977
  • Joined

  • Last visited

  • Days Won

    5

Everything posted by Uncle Bob

  1. Glad you got your money back. The GOV website for MOT history is your best friend when it come to checking for corrosion and other faults. My one previous owner black 3 door has 107k on the clock, yet is great condition underneath. It’s all a bit of a lottery finding a good one . Mine came from here…… https://www.jrscars.co.uk/used/cars/
  2. Did you reject this vehicle within the 30 days, as per trading standards regulations ?
  3. catalytic converter is in the manifold downpipe 👍🏻
  4. I had the same problem the other day ..button came off with the mat ! With a bit of patients and a couple of screwdrivers I prised the two bits apart . Then I lifted up the carpet…super glued the bit that going underneath…then press the top part on..again bit of super glue, now like new . As you say it’s not a screw thread the top part, the little claws that lock it together need to be teased apart…very fiddly but it can be done 👍🏻👍🏻
  5. The MMT is a robotic manual gearbox with electronics to make it auto shift . It still has a clutch inside maybe it’s started slipping . Maybe new clutch and get the electronic shift recalibrated . Will be a Toyota dealer job only .
  6. The Aygo Cat is part of the exhaust manifold, so very unlikely to be stolen by jacking the car up like a Prius.
  7. The inner lens surface was bit like when the inside of a windscreen gets really dirty, just used t cut and they come up really well . The Lens put up quite a fight to get off....it’s just judging how warm to heat them without becoming a pile of melted plastic 😉
  8. Done a few jobs on our 2006 Aygo sport today , O/S indicator not working so stripped the switch down (and that was a new switch 5 years ago !! ). Then fitted a 2009 Toyota Auris wiper switch that have variable intermittent wiper, then removed front fog lamps and cleaned lenses. Had to warm up the lens with a heat gun to soften the sealer, all went to plan and pleased with the results 😎
  9. Thanks guys, think I’m having too much time on my hands during lockdown !
  10. That what I’ve come to love about the 4.2 Rav4, it can have a few miles under its belt yet still be in good condition ......106K, one owner , full history 😎 Also added a B9010 satnav unit from an Avensis .
  11. Overhauled the brakes and rear shocks ....
  12. Using a breaker bar and a short socket the tensioner can be slackened but as said...it has a very very strong spring and took all my efforts when I replace my Rav4 belt 😳😳 .
  13. As the belt has broken, now is a good time to spine the other pulley’s to see if any have seized up causing the snapped belt. The belt could have just broken through age but that is unlikely. The engine is chain driven not belt driven . The serpentine belt goes around , water pump, power steering pump,alternator and idler...they all need to be checked that they spin freely.
  14. Had a few Lexus models over that last few years and enjoyed them but the draw back to 3 door Rav4 became stronger this year, and have purchased the last of the line Oct 2005 XT-R in an automatic. First time owning a black vehicle ..lucky I like cleaning and polishing 😎
  15. This is the toyota genuine item, I feel mine is a little stronger :) .
  16. The secret to making your own parcel shelf is to have a good template, I spent some time cutting and re-cutting a carboard one , untill I was happy it was a good fit all round. This I then transferred onto the timber, cut round it with a jigsaw and test fitted in position 3 or 4 time, just to check and trim any areas not 100 %. This was the basic timber cut to shape.... Then it was covered in 2oz wadding, followed by Jersey material in fleck grey, luck on the colour, it was the only choice in the shop ! With much stretching and stapling the shelf was covered, then out to the Rav4 to test fit it... I was so pleased with the fit, I've left it in place.... job done. The genuine Toyota shelf as some Velcro strips to hold it in but I found that was not needed, as the seats kept it tight in place. I now have a degree of security with the shelf fitted, strange why Toyota never included one from new .
  17. Hi Red as you've clearly seen, yes I've made up a parcel shelf, I was looking to buy one of EBay but lost out on that, then I looked up on Toyota's technical site how the shelf is fitted, and though , I could make my own :)
  18. Guess what? Took it to the dealership for a diagnostic... Ignition coil 4. Replaced the coil and it runs better than it has since she purchased it. Moral of the story, if your car has a mystery problem like this take it in for a dealership diagnostic. So maybe it could have been cheaper in the long run, and a faster diagnosis, to have used the dealership in the first place.....hey we all live and learn :)
  19. Hello Red, thank you for the positive comments, my last car was a Lexus Is 300 and belong to the LEXUS OWNERS CLUB. Now I'm back in the fold of Toyota's and the RAV4, I'm happy to spend time on the TOYOTA OWNERS CLUB, the new RAV4 DRIVERS CLUB,and the not so new RAV4WORLD :) We are all free to join all the clubs, as there is space for all of us in internet land . I hope to continue to post progress of my Rav4 without restriction over the coming months :).
  20. Sounds like you have covered most items, not sure what I can add....although just a though ,check all the earthing points, ones to the ECU, engine block, chassis, sometimes faults can be as basic as that. Also, of all the jobs you have done, have you ever checked the compression of the pistons ? Maybe if your problems is not electrical, you could have a sticky engine valve or lifter ?
  21. The early Rav4.1 VX had a strut brace highlighted in red in the engine bay, I've always liked that so decided to replicate that with my 4.2, fair bit bit of work getting it out....involves, wipers off, plastic windscreen panel, wiper motor and linkage , water channel etc, anyway after a few coats of toyota super red paint, I'm pleased with the effect, not to everyone's taste...but I'm easy pleased :) Also had a tinker with cam cover polishing, rather hard work by hand , does look a little brighter but now needs to be kept up, or is just dulls over.
  22. Nice write-up .....so what's the sound like now ? :)
  23. Have replaced the rear shock absorbers, KYB was my choice, they have a good reputation and fair on price.
  24. There is a wide spectrum of discoloured headlamps from different manufactures, French and German cars seem to suffer badly, on the other hand the Rav4 2001-2005, seems to suffer yellowing just along the top edge, my car was just the same, 10 years old and starting to go yellow. This was the product that done it for me, it's more of a motor trade item, used in bodyshops, it's very gritty, but the more you rub it in, it gets finer just don't let it dry out on the cloth. . I done my headlamps with it a few months back, and can just see the yellow returning, it is an ongoing problem, short of buying new headlamps as £200 ago ( genuine ) £80 pattern, so at that expense, I'm happy to buff them up every few months :)
  25. Uncle Bob

    Xtr Auto

    Yes I also lost the plot with a 2004 Rav4 CVT :(
×
×
  • Create New...




Forums


News


Membership