Jump to content
Do Not Sell My Personal Information


Abz-ae92

Registered Member
  • Posts

    115
  • Joined

  • Last visited

Everything posted by Abz-ae92

  1. Agreed :D same as mine, minus the supercharger ! Neat car!
  2. Try Apex spring lowers by 35mm or tein 35mm springs both in region of £130 and can be found on ebay. hope this helps.
  3. Hi , Just wondering if anyone can help me out with idle problems on my car. For a few months now i have been having idle issues where the car once fully warmed up idles rather high between 1100 - 1500 rpm.. mainly it fluctuates between 1100 - 1300 rpm, i have replaced the MAF sensor (Genuine part) and i assume the iat (intake air temp) sensor is within the MAF sensor, yet the problem still lies. The car sometimes hesitates to accelerate and whilst driving and engaging the gear in neutral the revs drop down to 900 rpm and bounces up to 1300 rpm rather fast, and gradually comes down to 1200 rpm. Whilst the engine is cold it doesn't rev as high. . Also do the face lift corolla suffer from leaky intake manifold gasket? your help will be much appreciated. thanks
  4. What price do you have in mind for the CTS . I know someone looking to buy a CTS facelift. Do you know if a fidanza lightened flywheel make any noticeable difference over stock? i'm thinking of getting one but not sure if its worth the money? Seem to be having real trouble putting the power to the ground on launch off i keep suffering from wheel hop, suspension are all standard height so just wondering anything i could do to reduce wheel hop. I know my wheels are on the light side but could it be that? I like to drag alot lol so any help would be useful. Cheers Power - stages two cams Wheel hop - front and rear engine mount inserts. Can you give me link where i can purchase engine mount inserts thanks
  5. What price do you have in mind for the CTS . I know someone looking to buy a CTS facelift. Do you know if a fidanza lightened flywheel make any noticeable difference over stock? i'm thinking of getting one but not sure if its worth the money? Seem to be having real trouble putting the power to the ground on launch off i keep suffering from wheel hop, suspension are all standard height so just wondering anything i could do to reduce wheel hop. I know my wheels are on the light side but could it be that? I like to drag alot lol so any help would be useful. Cheers
  6. Thanks and no its not keirans but i do recall his similar to mine :-) I used to own ae92 rolla, now owned this over a year and a bit. I've seen your build thread really like your CTS its very neat!! i thought it was up for sale ? or have u decided to keep it now?
  7. Thanks for compliment! any suggestion i'd like to increase power in na form ?
  8. Lovin the HKS High Flow system (",)

  9. Lovin the HKS High Flow system (",)

  10. Hello Everyone .. After owning my Rolla T Sport over a year and bit, i thought it was time to put some pics up . Sorry pics are not great as i took them with my mobile phone. Feedback good or bad welcome :-) What can i say about this beauty its simply just soo much fun especially when engaged in lift! it goes like stink for a 1.8 na Here's some spec as follows: 2005 Facelift model. TTE Lowering Springs TTE Rear spoiler TTE Front lip TTE Sideskirt EBC Drilled & Groved Discs all round Ferodo Brake pads. Pipercross Velocity Intake system - Cold air feed ported. 2.25" Catback HKS Superdragger Exhaust System 5" Tip 2.5 Inlet (Decat) 17" Lenso D1R Project D Lightweight alloys. Wider at back 215 / 40 / 17 Dunlop Sp Sports 8000e D1 Spec extended wheel nuts Smoked Tints Exedy Stage 1 Racing Clutch Denso IK20 Power Spark plugs TRD Short Shifter Momo Gear knob TRD Genuine engine oil cap duracon Cusco High Pressure radiator cap Team Heko Wind Deflector HID bi-xenon 1200k Jdm 4300k Yellow Fog Sound System: Alpine 9812rb Headunit 60 x 4 2 x Alpine Type R dual 4ohm subwoofer in a tuned box. 2 x Alpine MRD m1005 v12 mono-block amps 3.5 Farad Power Capacitor (Stinger) Split Charger Db audio T-rex 4 Gauge wiring. Jl Audio vrs 5.25 Components Tsumani Distribution Block Will have some new pics up of the HKS Superdragger . - Had TTE backbox, Cobra Sport & now HKS Superdragger CATBACK with straight through decat pipe, Sound on this HKS super dragger is awesome not too loud, nice deep tone, imo the best sounding & Free flowing exhaust on the market, did notice the considerable amount of power gains. (",) Spitting flames out after a good 30 min thrashing! lol thanks to the decat! Next Mods im looking into lightened flywheel, PPE Header, Braided hoses, Direct port Nitrous oxide System. (WON) Please Feel free to leave comments :)
  11. I've had one of those manifold before on a corolla ae92 , had to source one from america, needed slight modifcation to fit, but got good gains, they just cheap becuase its coming from abroad, like this one sold for £180, neways does anyone know where i can buy a manifold that will straight fit my t sport? Has anyone noticed the difference in an aftermarket manifold on a rolla? I hear the oem manifold is quite restrictive is this true, and if i get the manifold custom made, can someone tell me what size diameter the manifold should be best? I'm getting a MIJ exhuast with 200 Cel sport cat, unsure whether to stick to 2.25" or go for 2.5" pipe? anyone from experience know which one am better of it ? Thanks
  12. Having owned my 05 CTS for 3 months - lovin it. , i shall be investing into a decent digital camera, pics will be up here shortly. :)
  13. Are you mad lol under 6 sec ?? stanbdard t sport no chance!
  14. Yes Thats the best time my car has hit 6.5 sec, i am hoping to hit the 5.7 sec barrier, with a few mods my car will be up there hopefully . I timed the my car 0-6 0 with a G tech pro Timer, it is very accurate works great everytime! Some racing slick tyres will bring them 0-60 time its all about the traction in 1st gear - get good traction expect very good time. i achieved my time with budget tyres... would love to see slicks on!
  15. If the Celica VVTLI exhaust manifold is same as corolla t sport, will this manifold fit ? http://cgi.ebay.com/ebaymotors/00-05-TOYOTA-CELICA-GTS-GT-S-JDM-RACING-HEADER-EXHAUST-_W0QQcmdZViewItemQQfitsZModelQ3aCelicaQ7cSubmodelQ3aGTSQQhashZitem2eb435b54dQQitemZ200591914317QQptZMotorsQ5fCarQ5fTruckQ5fPartsQ5fAccessories Basically its listed as celica GTS , in america thats what they known as. It also fits the XRS models in america which use the 2zzge engine. I am not sure if this manifold comes with air injection , or could that be custom made later when installed, obv i dont want the CEL light on ? anyone help me, ive been quoted over 400 for a custom made manifold, id rrasther save some dollars and pick up ebay one almost half the price, does the original exhaust manifold have a air injection port ? im unsure what this is . help! Thanks
  16. 0-60 mph timed with a G TECH Timer.. achieved 0-60 in my 05 CTS 6.5 sec. Is that a good time anyone?
  17. I think the caliper carrier has slider pins one on top and one on bottom, they are sezied i think, if the slider pins are sezied would that be the cause of the discs and pads grinding slightly whilst im driving? when i got new pads put in, the slider bolt was seized, i've been away for a while now need to sort this issue out asap. I think the caliper piston are ok just the sliders are sezied which are on the carrier, can someone confirm please. thanks
  18. Hey, My Centre light bulb has blown out, i can't seem to take the plastic lens off as there is no clip, i need to gain access without breaking it, and find out what size bulb i need to replace it, i also notcied that if you unclip the whole plastic surround around the plastic clear lens, it drops down, i don't want to break anything so left it as it is, if anyone has replaced centre light bulb before can you please help me! thanks
  19. did it sell for 3250 ? cheap!! nice car m8!
  20. The brake pedal drops when you brake really hard, does this mean there is air in the system, would bleeding all four brakes reslove this issue? . When the car is off, i pump the brake pedal a few times, then it goes solid where you can not push anymore, if there is air in the system wouldn't the brake pedal feel spongy? Thanks
  21. hey, Just wondering if anyone could help me out on this issue i have with my 05 CTS brake caliper bracket also known as the carrier. My nearside front carrier is seized, whilst driving the discs are grinding agaisnt pad, i have just had my pads changed and the mechanic noticed that the carrier was seized, I have not yet tried heating it up and see if it comes loose. I rung up MR T for the caliper bracket its 93.18 plus VAT! I was wondering if the e12 1.6 vvti (04) caliper carrier would fit my t sport? i know one for sale cheap at £20. MR T said that the 1.6 part number is different however the price is same, also he could not say if both parts same with different part numbers, i need your help, don't fancy paying over the odds, if anyone can help that be great!!. Whilst am driving after a while you can hear the nearside front pads touch the discs, like its always on, doesn't sound too healthy either so its parked up atm. Also notcied when braking really hard, the car stops but eventually the brake pedal drops to the floor, is that ABS kicking in? and could the cause of it be to do with the carrier being sezied? atm when applying brakes hard one of the wheels locks up causing the pedal to drop down, feels scary! brakes are very important, i'd like to sort it out ASAP. Your help will be appreciated!
  22. Hey luke did u notice any difference in the brake pedal response? Does it eliminate the spongy feel? I've seen them brake lines on fensport they by black diamond, anyone know if HEL brake lines good brand?
  23. ? I'd like to know if changing them to some better ones actually make much difference, also i wanted to know if the brake lines are the same on pre faclift models? I have a faclift model, seen some brake lines on ebay to fit pre facelift, can't find any for facelift, if same i'll just snap one up , before i can i need someone to help out!! Any other brands i should look out for apart from HEL, are they any good?
  24. I'll pm him, lets hope these HEL brake lines for the pre facelift fit the facelift models. Does anyone have any in depth knowledge on brake lines?
×
×
  • Create New...




Forums


News


Membership