Yaris Key Programming

Hi I got a used Yaris key from eBay last week for £15, I had 2 keys already but one key had no insides only the blade for it, So I swapped the insides over and followed the instructions I found on here! First I programmed the key lock and unlock buttons which worked fine all done it 2 - 3 minutes, After that I Programmed the immobiliser side of the key which was also done in 2 - 3 minutes! The instructions were very easy to follow and like I say took a maximum of 6 minutes to do the key, So for

Here is the link for the programming, INSTRUCTIONS Programming Remote Key Fob Drivers door open and removed from ignition Insert key into ignition, then remove it within 40 sec close and open drivers door twice inset key in ignition then remove within 40 sec close and open drivers door twice close drivers door Insert key into ignition switch ignition ON and OFF once to program new key code whilst retaining original codes or twice to program a new key code whilst erasing the original codes Remov