Jump to content
Do Not Sell My Personal Information


  • Join Toyota Owners Club

    Join Europe's Largest Toyota Community! It's FREE!

     

     

Mot Light Failure


fj1200a
 Share

Recommended Posts

Having done little more than give it a wash and checked everything worked, my 02 D4D with 85,000 miles failed on one thing - the drivers side headlight was set to low (over here in Northern Ireland tests are government run and very stringent).

I have adjested the upper and lower teethed whhels on the rear of the headlight but to no avail - can someone please point me in the right direction.Thanks.

Link to comment
Share on other sites

Hi and welcome.

It could be something like the bulb isn't seated squarely in the lens. However, without a proper alignment gauge you'd just be guessing with the direction of the beam. Take it to a garage and get the lights realigned. With the proper gear it's a 10 minute job, and then you'll know for sure that they are OK for the retest !

Good luck

Rich

Link to comment
Share on other sites

i doubt its anything to do with your bulb not being seated properly or anythin, you just need your headlights set. i wouldnt go for an mot without gettin it done. if you had had the car checked over before the mot the mechanic should have checked this.

it needs done with the machine that a mechanic will have to make sure it is set just rite.

go to your local mechanic he'll probably do it for free as it takes like a minute but give him a couple quid for the trouble. where you from anyway? im in portadown.

Link to comment
Share on other sites

Latest Deals

Toyota Official Store for genuine Toyota parts & accessories

Disclaimer: As the club is an eBay Partner, The club may be compensated if you make a purchase via eBay links

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share







×
×
  • Create New...




Forums


News


Membership