Jump to content
Do Not Sell My Personal Information


Interested To See Wirings Of Rear Lights


Speed_Chaser
 Share

Recommended Posts

Hello! I'd like to see wirings of rear lights. There's a connector and I am interested to see in which order and to which holes of the connector are the wires connected.

I'd really appreciate if someone could post two pics, one from both sides (as there's fog light and a reverse light on the other side, so the wirings are different). If you post, please mention which pic is from reverse light's side and which is from fog light's side.

Here's the connector. It is easy to unplug by pressing with a screwdriver or your nail on that part which is marked with an arrow on the picture below:

36743cce9d37.jpg

Best regards, Alex

Link to comment
Share on other sites

Unplug the connector (left or right tail lamp), you can see nine pins

Their significations are like this:

- for the left tail lamp: 5 is the ground

4 - parking light

3 - brake

8 - left signal indicator

7 - rear fog lamp

6 - reverse lamp

- for the right lamp: 5 - ground (minus)

6 - parking

7 - brake

1 - right signal

4 - reverse

These are for TMC production models. For TMUK, TMMT models, at the left lamp no.6 is not connected.

Anyway, before you make any modification, check the connections with a voltmeter. Good luck!

Link to comment
Share on other sites

Unplug the connector (left or right tail lamp) , you can see nine holes, and count them from the left to right. Their significations are like this:

- for the left tail lamp: 5 is the ground

4 - parking light

3 - brake

8 - left signal indicator

7 - rear fog lamp

6 - reverse lamp

- for the right lamp: 5 - ground (minus)

6 - parking

7 - brake

1 - right signal

4 - reverse

These are for TMC production models. For TMUK, TMMT models, at the left lamp no.6 is not connected.

Anyway, before you make any modification, check the connections with a voltmeter. Good luck!

Big thanks to you tavy, that was really helpful. Now the question which raised up after reading your answer: why is there a possibility to connect reverse light on both sides? I thought there should be place for reverse only in one connector, and in other connector only one fog light. But seems like there's a place for reverse wire on both connectors :o

Best regards, Alex

Link to comment
Share on other sites

Welcome, Alex.

Maybe in other countries is compulsory having two reverse lamps and fog lamps is fitted separately. I don't know exactly, it's a supposition.

Link to comment
Share on other sites

Yea I think that's the only reasonable answer. At first I thought maybe it's because left hand and right hand drive countries, but then there should be connectors for fog lights on both sides too... But that's not important really :)

Best regards, Alex

Link to comment
Share on other sites

  • 1 year later...
  • 1 year later...

Hi, am I right to say then that there is a spare reverse light wire on the RHD on the uk models? If so how can I tap into this? I need this to power the reverse camera. Would a T-tap work?

Link to comment
Share on other sites

  • 3 years later...

Here are colour codes for non-UK model.

 

Left lamp:

Yellow - blinker

Light blue - fog light (on UK model this one is on the right I guess)

Red - reverse

Green - parking light

Blue - brake


 

Right lamp:

Light blue - blinker

Red - reverse

Green - parking light

Blue - brake
 

Link to comment
Share on other sites

  • 4 months later...
On 2-10-2009 at 8:49 PM, tavy said:

Unplug the connector (left or right tail lamp), you can see nine pins

Their significations are like this:

- for the left tail lamp: 5 is the ground

4 - parking light

3 - brake

8 - left signal indicator

7 - rear fog lamp

6 - reverse lamp

- for the right lamp: 5 - ground (minus)

6 - parking

7 - brake

1 - right signal

4 - reverse

These are for TMC production models. For TMUK, TMMT models, at the left lamp no.6 is not connected.

Anyway, before you make any modification, check the connections with a voltmeter. Good luck!

Pleas can you upload the picture        

"Unplug the connector (left or right tail lamp), you can see nine pins

Their significations"

 agen, i need it.

And can i find a hub for this connector?

Thank you

Link to comment
Share on other sites

  • 7 months later...
  • 1 year later...

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share





×
×
  • Create New...




Forums


News


Membership