Ash1502 1 Posted September 10, 2013 Share Posted September 10, 2013 my friends aygo / c1 / 107 has the engine light on and a fault code of P0171 system too lean. I have checked online and a citroen / pug / toyota data website informs me that this faut is likely caused by either a vacuum leak downstream of the mass air flow (MAF) sensor or it is dirty and needs a clean.Where abouts on the engine is this located?orhas anyone else had the same fault code Quote Link to post Share on other sites
FROSTYBALLS 3,327 Posted September 10, 2013 Share Posted September 10, 2013 See http://www.toyotaownersclub.com/forums/topic/113628-aygo-maf-sensor/ Quote Link to post Share on other sites
Ash1502 1 Posted September 10, 2013 Author Share Posted September 10, 2013 so the car does not have a maf. what would you recommend to diagnose the fault? Quote Link to post Share on other sites
Devon Aygo 951 Posted September 11, 2013 Share Posted September 11, 2013 There is a bulletin from Toyota which may apply:DESCRIPTION OF PHENOMENONSome customers may complain that it’s difficult or impossible to start the engine, the Mil comes on and the DTC P0171 (system to lean) is stored in the engine ECU memory. When driving the power performance of the vehicle might be slightly reduced. PRODUCTION CHANGEThe fuel pump production process has been improved. A new fuel pump ( in the fuel tank ) is required part # 77240-0H010 + Gasket 77169-0H010 & Retainer 77144-0H010.The fix was included in production from November 2009. Quote Link to post Share on other sites
Ash1502 1 Posted September 11, 2013 Author Share Posted September 11, 2013 There is a bulletin from Toyota which may apply:DESCRIPTION OF PHENOMENONSome customers may complain that it’s difficult or impossible to start the engine, the Mil comes on and the DTC P0171 (system to lean) is stored in the engine ECU memory. When driving the power performance of the vehicle might be slightly reduced. PRODUCTION CHANGEThe fuel pump production process has been improved. A new fuel pump ( in the fuel tank ) is required part # 77240-0H010 + Gasket 77169-0H010 & Retainer 77144-0H010.The fix was included in production from November 2009.would this also apply to citroen c1's as that is what he has got. ive been told by a toyota technician that i know, and also by the main dealer that they frequently replace the pre cat oxygen sensors to rectify the fault. Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.