Water Temp Sensor ------

[- A - Go - 7]

Hi, a quick question... where is the water temp sensor located on the car and is it an easy access to it?

Any pictures possibly of its location.

Thanks..

J

[gampla 16]

Look at the head near the transmission

Sent from my G8341 using Tapatalk

[- A - Go - 7]

Thanks gampla for your input!! 😀👍

Cheers...

J

[flash22 656]

For a temp sensor to work correctly it needs to be in the flow of water if try to tee off the ecu sensor all you will do is cause both sensors to read high

you can put it in the top rad hose but it will only read correctly with the stat open

[- A - Go - 7]

1 hour ago, flash22 said:

For a temp sensor to work correctly it needs to be in the flow of water if try to tee off the ecu sensor all you will do is cause both sensors to read high

you can put it in the top rad hose but it will only read correctly with the stat open

Ok, so where on the hose can i put the sensor? I have a 28mm sensor joint pipe but decided to use the sensor in the block rather than cutting into a pipe etc..

Cheers

J

[flash22 656]

On a straight part, get your self a top hose first then if it all goes wrong you have a back up

[- A - Go - 7]

3 minutes ago, flash22 said:

On a straight part, get your self a top hose first then if it all goes wrong you have a back up

Cheers!! 😀👍, will do !!

J