Alloys

[PaulD76]

Hello Everyone

Ok this is probably been asked before BUT.....

Does anyone have any suggestions for ALLOY Wheels for their Supra!

Ive been looking for about a month now and the ones I like seem to cost 3k + (ouch)

I am looking for 19x10 and 19.8.5 Deep Dish 5 spoke alloys but not something too plain. I wanted to spend around 1.3k

If anyone has any suggestions and photos that would be perfect. My local dealers seem to be lacking in advice!!!

Thanks for any help.

Paul

[Penguin]

Ello, i've got standards on atm, i keep getting told 18inch kahns are the way to go.... not sure tho, i would love to have a nice set of deep dish alloys.....

[Martin F]

If you are going for 19x10 at the rear try to keep to 19x9 at the front. There is a 1" difference between front and rears on stock wheels and to try and maintain a good balance to the handling its best to keep it that way.

19" is not going to make the car handle greatly after all it was only a few million spent on the suspension design by Toyota to get it to handle correctly on the stock wheels.

But if you're after looks rather than out and out handling then go for it.