Jump to content
Do Not Sell My Personal Information


  • Join Toyota Owners Club

    Join Europe's Largest Toyota Community! It's FREE!

     

     

Question To All Turbo Yaris Owners


natgx
 Share

Recommended Posts

Hi

Sorry to bother again.

I have fitted the Turbo now - Does anyone know if the Apexi S-AFC II will fit to the ECU of a 1.0 litre - P.S My car is made in France not Japan.

Many Thanks

Natalie

Link to comment
Share on other sites


hi nat

did the FCON work???

Link to comment
Share on other sites

Hi

No- I will not wire up to my ECU therefore I have now found out that I will need a Piggyback such as the Apexi S-AFC II.

I was wondering if anyone had fitted one of these to a European car?

Cheers

Nat

Link to comment
Share on other sites

not that i know of, so you have the turbo fitted to the engine but you have to get a stand alone ECU to make it run????/

Link to comment
Share on other sites

yes - I reckon - gonna cost me more money.

So you dont know anyone? I am running my car at dangerous levels at the moment with the turbo on and no piggyback for the air/fuel!!!!

Nat x

Link to comment
Share on other sites


thats not good :( hope ya get sorted :thumbsup:

Link to comment
Share on other sites

Me too!!! I was so gutted - Couldnt drive to JAE - Couldnt drive to TOTB!!!

Nat x

Link to comment
Share on other sites

Me too!!! I was so gutted - Couldnt drive to JAE - Couldnt drive to TOTB!!!

Nat x

:(

Would have like to seen your car :(

Link to comment
Share on other sites

The answer to your question is DASTEK Unichip.Its a piggy back computer that sorts out all your fuel and ignition requirements if you set it up properly on a dyno.

An APEXi SAFCII can be installed also, but it deals only with the fuel, not the ignition.

Link to comment
Share on other sites

The answer to your question is DASTEK Unichip.Its a piggy back computer that sorts out all your fuel and ignition requirements if you set it up properly on a dyno.

An APEXi SAFCII can be installed also, but it deals only with the fuel, not the ignition.

Great - I am not bothered how much I need to pay - I just need it sorted out before I blow the engine! Where can I get this from?

Many Thanks

Natalie

Link to comment
Share on other sites

Natalie, if you were living in Athens as I do, I could give you that answer :lol:

I guess you need to find the DASTEK dealer in UK. In Greece the DASTEK unichip fitted and tuned on a DASTEK dyno costs 450 euros

Link to comment
Share on other sites

Natalie, if you were living in Athens as I do, I could give you that answer :lol:

I guess you need to find the DASTEK dealer in UK. In Greece the DASTEK unichip fitted and tuned on a DASTEK dyno costs 450 euros

Thanks a lot for you help! - I have found the website and contact details.

Many Thanks Again - Natalie x

Link to comment
Share on other sites

Latest Deals

Toyota Official Store for genuine Toyota parts & accessories

Disclaimer: As the club is an eBay Partner, The club may be compensated if you make a purchase via eBay links

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share






×
×
  • Create New...




Forums


News


Membership