2000 Camry LE keyless remote Programming

[a.p.landes]

I have one working remote and am trying to program another. ID# GQ43VT14T I would appreciate any help. Thanks Paul

[Big Dooky]

Program Remote for 2002 Camry (and perhaps other Toyotas with same remote)

1. Start with the key out of the ignition, driver door open and unlocked

2. Insert the key and take it out - twice within 5 seconds

3. Close and open the driver door - twice within 40 seconds

4. Jump out and run around the car once as fast as you can (optional)

5. Insert the key and take it out – once

6. Close and open the driver door - twice within 40 seconds

7. Insert the key and close the driver door

8. Turn the ignition to “On” hold it for 1 second, turn to “Off” (for “Add” mode)

9. Remove the key

10. Hold down both “Lock” and “Unlock” at the same time for one second

11. Press “Lock” within 3 seconds.

(If the signal was recognized the locks will cycle once, if not they will cycle twice.)

You can program a maximum of 4 remotes. Do a fifth and you’ll loose the first.

To see how many are programmed: on step 7 switch between on and off (holding 1 sec in each position) 3 times. The locks will cycle once for each remote that is programmed.

To erase all programmed remotes: on step 7 switch between on and off (holding 1 sec in each position) 2 times. (Say if you are replacing a lost or stolen remote)

To erase all programmed remotes and disable the remote key entry system all together: on step 7 switch between on and off (holding 1 sec in each position) 5 times.