Sign in to follow this  

Hose Clip / Clamp - Any Ideas?

Recommended Posts

Hi all,

I'm planning on draining / replacing coolant in my Aygo soon.

I'm wondering what type of pliers I need to remove the hose clip/clamp on the lower radiator hose.

I can see "Norma" type pliers pliers&tier1=Sealey+Tools&tier2=Vehicle+Service+Tools&tier3=Cooling+System&tier4=Coolant+Hose+Clip+Tools&catref=VS166

Or these clic compatibles pliers&tier1=Sealey+Tools&tier2=Vehicle+Service+Tools&tier3=Cooling+System&tier4=Coolant+Hose+Clip+Tools&catref=VS1664

Any advice would be greatly appreciated.



Share this post

Link to post
Share on other sites

when I replaced the water pump on my Aygo, i had to take off the bottom hose to drain the system, I used a pair of large mole grips, and gripped the "ears" on the clip until they touched together....and leave them clamped. pull the clip with the grips attached up the hose, and pull off hose and let the coolant out.

Share this post

Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Sign in to follow this