kaliope 17 Posted July 4, 2016 Share Posted July 4, 2016 Made a how to: Quote Link to post Share on other sites
Barry W 0 Posted August 4, 2016 Share Posted August 4, 2016 I suggest yo apply some PTFE tape onto the wiper thread, makesit a lot easier when replacing the wiper again! Quote Link to post Share on other sites
Hal Mercier 9 Posted April 4, 2020 Share Posted April 4, 2020 So....it's impossible to remove without a special tool? Handy....I'm changing the front springs for which I need proper access to the strut top nut, which requires removing the shroud/gutter plastic panels, which requires removing the wiper, and I need a special tool for the wiper? Get real.... Quote Link to post Share on other sites
flash22 597 Posted April 4, 2020 Share Posted April 4, 2020 A standard small puller should do the trick, if they have never been off they will be corroded in place yes you can get pullers design to remove wipers (body shops and windscreen fitters use them) edit, pop the cap off and remove the nut and spray it down with something like GT-85 leave a few hours and repeat https://www.youtube.com/watch?v=bQxlFT5SEqM Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.