Compression Ratio And Turbo Queries Gt And Gi

[StarletGi]

As you all know I own a EP82 Starlet GI with a 4EFE, I woul liek to turbo charge it what exactly would I need and what would have ot be changed.

I also need to know the compression ratio for the Starlet Gi and the GT. So the ratio for the 4EFE and the 4EFTE engines.

If my compression isn't high enough I can't charge thus I can't pack more air into it.

[KidturboSTL]

Get 4efte pistons and rods. Use a 0.6mm MHG and then get a compression test done. You should be around 8.5:1 You don't want to go too high on compression because it will be dangerous to boost high, but also going too low will mean no low end power. Let me know if there is anything I can help with!