Ivan's Ae101 Build Thread 4Age Bt 20V6Spd No 56K

[JDM20VAE101]

Planing Clutch Line Routing 7-16-14

Tucked Brake Master Cylinder Lines

Brand New OEM Clutch Master Cylinder

Routing For the Line... Trough this hole and Behind the brake line...
 

And behind the Transmission to the Clutch Slave right there...

[JDM20VAE101]

Removing JDM Oil 7-16-14

Removing the JDM Oil from the engine LOL!

[JDM20VAE101]

Radiator Hoses TestFit 7-18-14

Test fit for the Sillicone Radiator Hoses

[JDM20VAE101]

JDM Oil Filter 7-21-14

This is how look the Media of the Made In Japan Filter Vs the Thailand (Paper) ones...

Part Number 90915-10003

[JDM20VAE101]

Rep OEM Filter 7-23-14

Toyota Replace the Made In Japan Media Oil filters for this Thailand Made Paper ones... :facepalm::facepalm::facepalm:

[JDM20VAE101]

Engine Fluids 7-24-14

Toyota Factory Red + Water Weather

Mobile Fresh Oil to Use During Start Up...

[Mike169]

Hi Ivan.

I like reading your posts, it's like a story unfolding or reading a book if you like, well done for all your photo's and comments.

Mike.

[JDM20VAE101]

11 hours ago, Mike169 said:

Hi Ivan.

I like reading your posts, it's like a story unfolding or reading a book if you like, well done for all your photo's and comments.

Mike.

Hey Mike!

I like you read it and watch this thread, that help to keep me motivated to keep going on this and document all the steps here!

Thanks you very much for your support buddy! 

[JDM20VAE101]

Extreme Heat Shrink Custom Tucked Harness 7-24-14

Brand New Custom Tucked With Extreme Heat Shrink Conversion Harness
All New OEM Plugs, Sockets and Pins...

[JDM20VAE101]

Custom Tucked Brake Prop Valve 7-24-14

Inside Car, Custom Tucked Proportioning Brake Valve and lines relocated..

[appsmartvn]

Set of Cusco Coilovers with Camber Plates Received

[JDM20VAE101]

16 hours ago, appsmartvn said:

Set of Cusco Coilovers with Camber Plates Received

thanks man!

[JDM20VAE101]

Radiator Hose Clamps 7-24-14

Some Brand New Hybrid Racing Radiator Hose Clamps

[JDM20VAE101]

Installing New Engine Harness 7-30-14

When I'm Installing the New Harness Made by Tweakd Performance find did they made some mistakes on it.

This one outside the loom...

Should be here...

Short cables

When this is placed here...

And where isn't to be placed visible here...

Wrong Reverse Connector when I specify the Transmission and everything...

Wrong Connector type here too...

Should be like this one...

This Ones relocated Inside Car a bit shorter

The diagnostic connector replaced with this one...

I contact him to solve this issue...

[RazzerRazor]

Amazing this. I want you to finish this project....but I don't. Just love what you do next and the detail👍😉

[JDM20VAE101]

On 11/27/2016 at 10:11 PM, RazzerRazor said:

Amazing this. I want you to finish this project....but I don't. Just love what you do next and the detail👍😉

Thank Man! yeah I want too! But you know always we can find something to change or improve so almost never ending LOL!

I appreciate your comment and wishes mate! Thank for watching and keep subscribed for more updates.

Thanks Again!

[JDM20VAE101]

My Boy Playing 7-30-14

My Boy playing in the car...

Tom's Seat Harness Badge...

[JDM20VAE101]

TOMS RARE Suede SW 8-7-14

New to add on My Collection of TOM's Steering Wheels...
Very RARE TOM's Racing Steering Wheel SUEDE EDITION...

Arrived...

Unpacking...

Teasing Picture!!!

SUEDE EDITION!

[Mike169]

What a good looking steering wheel, suede as well, I don't think I know anybody with a steering wheel covered like this.

[RazzerRazor]

Hope the harness hasn't slowed you down to much! Annoying though when you give a company spec details and more than one thing is wrong! 

Loving the steering wheel😍 no hands getting cold on that bad boy 😁👍

[JDM20VAE101]

16 hours ago, Mike169 said:

What a good looking steering wheel, suede as well, I don't think I know anybody with a steering wheel covered like this.

Hi Friend!

Yes, they are vere rare and hard to get in that Specs. I have the same one too but leather with optional pad too. But when I find this one I can't let it pass...

[JDM20VAE101]

16 hours ago, RazzerRazor said:

Hope the harness hasn't slowed you down to much! Annoying though when you give a company spec details and more than one thing is wrong! 

Loving the steering wheel😍 no hands getting cold on that bad boy 😁👍

Well that's the worst thing, when you are very specific with all the things and pay more than $1K for this conversion harness with that errors... But the situations is being working out with  the company... needs to be re-routed and they will send me the correct connectors...

The SW man I was years trying to find one... and finally get it on my hands!

 

Thanks for looking mate!

[RazzerRazor]

Wow that much £1K. Defo you want it right. Glad they're sorting it ASAP for you and now qualms about it either. Happens to us in work ordering looms etc for trucks. Turns out wrong then they blame us. Cheek! 

I did a quick google search and not much come up ha ha ha 

[JDM20VAE101]

58 minutes ago, RazzerRazor said:

Wow that much £1K. Defo you want it right. Glad they're sorting it ASAP for you and now qualms about it either. Happens to us in work ordering looms etc for trucks. Turns out wrong then they blame us. Cheek! 

I did a quick google search and not much come up ha ha ha 

haha yeah man!

so you work on trucks? interesting! I like trucks!

[JDM20VAE101]

Floor mats Sold 8-9-14

Bye Bye!
Last Pic of the floor mats... Sold to a friend...