Jump to content
Do Not Sell My Personal Information


  • Join Toyota Owners Club

    Join Europe's Largest Toyota Community! It's FREE!

     

     

12v battery maintenance, issues, etc.


scar
 Share

Recommended Posts

Has anyone bought one of these Battery monitors?

I was thinking of getting one to plug into the socket at the front of the central console of my 2022 Toyota Yaris Cross. I thought it would sit quite nicely in the tray.  Seems quite an easy non invasive way for me to keep an eye on the charge of my 12 volt auxiliary Battery rather than having to connect direct to the Battery itself.

I would be grateful for your thoughts.

Thanks Chas

https://www.halfords.com/motoring/battery-maintenance/battery-accessories/ctek-comfort-indicator-cigarette-plug-549784.html?recType=OCWOTBRec

549784.thumb.webp.be9f33213f80e7d6c8674e3d963010d0.webp

Link to comment
Share on other sites

Really not necessary since you have outlined so many back up charge things. I don't have a single thing that you have in your list, that's having had the gen3 for 5 years, now gen4. 

Link to comment
Share on other sites

8 minutes ago, Mojo1010 said:

Really not necessary since you have outlined so many back up charge things. I don't have a single thing that you have in your list, that's having had the gen3 for 5 years, now gen4. 

I just thought it would be useful, it fits in a space that I wouldn't use for anything else ant not expensive.

Get in the car, put it in ready mode and glance at the lights, job done. I realise that it's only an indication but good enough to placate my paranoia. 

Link to comment
Share on other sites

Chas, I had one and returned for a full refund.

1.  Drove car. LED Green.

2. Switched off.  LED Yellow. 

3. F*****d.  LED Red.

If it was going to tell me to put the car on charge not long after I switched off I could see no point.

Better get something that actually tells you something useful.

  • Thanks 2
Link to comment
Share on other sites

No need to be paranoia, you have a jump start and a charger that's more than enough. I only have a multi meter just for info on Battery voltage drop, + first year free breakdown cover, will be getting cover each year after. 

If my car Battery fail in the first 3 years I would insist on Toyota replacement free of charge as it wouldn't be lack of driving on my part, I make sure it gets driven at least 2-3 times a week. 3 years onward, then replace with a 45Ah Battery if it fail.

  • Like 2
  • Thanks 1
Link to comment
Share on other sites


36 minutes ago, Roy124 said:

Chas, I had one and returned for a full refund.

1.  Drove car. LED Green.

2. Switched off.  LED Yellow. 

3. F*****d.  LED Red.

If it was going to tell me to put the car on charge not long after I switched off I could see no point.

Better get something that actually tells you something useful.

And @Mojo1010 .

Thanks, something that tells me the voltage with the ignition switched off would be more use. I could get toyota to fit this or similar when I get the car serviced in the new year with the indicator cable routed under the carpets into a suitable place in the front of the car.

One last question do you know if I should get m6 or m8 eyelets?

Thanks for your help

https://www.ctek.com/uk/battery-chargers-12v-24v/accessories/car-accessories/indicator-eyelet-m8

 

Link to comment
Share on other sites

28 minutes ago, Jasper. said:

From memory mine were M6.

 

Thank you. 👍

  • Like 1
Link to comment
Share on other sites

The positive and negative terminals are different.   You can however attach M6 near the Battery if not actually on the post.

  • Like 1
Link to comment
Share on other sites

1 hour ago, Chas G said:

And @Mojo1010 .

Thanks, something that tells me the voltage with the ignition switched off would be more use.

Indeed it would and this is exactly what I make use of Hybrid Assistant for on my phone...

Screenshot_20230628-142503.thumb.png.5bbd509113410f449708ad3934a8915d.png

(that image is with the car switched off but HA connected to the OBDII port via BT.)

  • Like 2
Link to comment
Share on other sites

Chas, there are lots of options for belt and braces (made easier).

Your jumper pack will be connected to the positive blade in the fuse box.  If your jumper pack has a light then you can find everything in the dark.

For charging, rather than putting it in Ready mode I would use the CTEK charger.  It actually delivers a higher voltage. To make that easier I got my garage to fit a charging tail to the Battery and accessible in the back.  I then just attach the charger cable as required. 

For the Uber paranoid you could get the garage to wire in a BM6 Battery monitor.   It sends the Battery voltage, state of charge and voltage to its App through Blue Tooth.

Link to comment
Share on other sites

22 minutes ago, Roy124 said:

Chas, there are lots of options for belt and braces (made easier).

Your jumper pack will be connected to the positive blade in the fuse box.  If your jumper pack has a light then you can find everything in the dark.

For charging, rather than putting it in Ready mode I would use the CTEK charger.  It actually delivers a higher voltage. To make that easier I got my garage to fit a charging tail to the battery and accessible in the back.  I then just attach the charger cable as required. 

For the Uber paranoid you could get the garage to wire in a BM6 battery monitor.   It sends the battery voltage, state of charge and voltage to its App through Blue Tooth.

Thank you Roy. I will charge the Battery once a week and when it gets serviced I will follow your advice of tails off the Battery.

Link to comment
Share on other sites

@Roy124 having watched this excellent video I will get a bm2 Battery monitor and let it tell me when to charge my Battery. Perfect 👍

 

  • Like 1
Link to comment
Share on other sites

I use a similar BM monitor.

12.2 volts Battery will start car but best to top it up when you have time.

12.5 volts or more is fully charged 

14 to 14.5 or 14.6 is charging voltages.

M6 eylets you have to cut and open up slightly better option is M8 eylets.

  • Thanks 1
Link to comment
Share on other sites


14 hours ago, Chas G said:

@Roy124 having watched this excellent video I will get a bm2 battery monitor and let it tell me when to charge my battery. Perfect 👍

 

I have the BM6, same difference though the data is slightly different. 

My BM6 is about 12 feet from my phone and on the far side if the car and a house wall.

Apart from the instant display over 5 minutes you can select one day,  3 days or 5 days.  Better, you can also download load the data, in 2 minute intervals,  for the month. 

Comparing the instant,  instabilised output from the OBD reader I found the BM6 stabilised display was very slightly lower.

  • Thanks 1
Link to comment
Share on other sites

@Roy124 and @Derek.w

I have ordered the BM2 which will be delivered tomorrow.

Hopefully it will give me the information I need to charge my Battery when needed.

Thanks for your help

Chas

Link to comment
Share on other sites

I fully charged the Battery on Monday (ctek 5). I didn't use the car on Tuesday. This afternoon (Wednesday) I went to do my weekly shop which is about 10 miles each way. Just used a multimeter to check the Battery voltage and it is 12.3 volts so I have put it back on charge. I really need to get the charger connector extension  tails fitted sooner than later so that I don't have to open the bonnet. I will get the 3m ones so I can fix the charger to the wall in my garage and plug in.

Link to comment
Share on other sites

28 minutes ago, Chas G said:

I will get the 3m ones so I can fix the charger to the wall in my garage and plug in.

Exactly what I did.

  • Thanks 1
Link to comment
Share on other sites

My Chr has gone nearly 3 years no issues includes 3 weeks stay in hospital is it the same Battery as the Yaris and Corolla ? 

  • Like 1
Link to comment
Share on other sites

After three years, the "Desulfating" mode is already started for 30-60 minutes during charging .

image.thumb.png.cf6b159d3aedc922b5f10c349eafb602.png

Link to comment
Share on other sites

On 12/13/2023 at 8:00 PM, Roy124 said:

Exactly what I did.

I will get the 3m ones so I can fix the charger to the wall in my garage and plug in.

Toyota yaris cross:-

Being able to charge the 12 volt Battery in my garage has brought to mind another question.

If for some reason the car won't go into "ready" mode, how on earth would I or anyone else be able to get it out of the garage for recovery.

I understand that it is possible to lift a small hatch on the side of the gear lever surround to move it into neutral but would this also release the hand brake and steering lock so the car can be rolled out of my garage?

Apologies if this is a stupid question.

Thanks Chas

Link to comment
Share on other sites

I have used these in the past to move vehicles when the electric handbrake has stick on.

 

MSW Hydraulic Wheel Dolly Car Skate Vehicle Positioning Jack Foot Pump  Hydraulic Tyre Lift Roller Dolly Hoist 2 Pcs. 680kg Ea. MSW-HRH-680 (Tyre  Width 30cm, 4 Nylon Castors, Max. Lift Height 280mm) :

  • Like 2
Link to comment
Share on other sites

Chas, good question. It would depend on how tight a fit your car is on your garage.  I assume you can open your car door to get in and out.  If it is you can pop the bonnet lock.  Your next problem would be accessing the fuse box on the near side of the engine.  If you can they you can connect the Battery pack jump leads.

However your question prompts another solution. Attach the jumper pack to the charger tail off the Battery.  However if you have  a charger that you can connect to the fuse box terminal or the Battery tail you should not need to use the jumper pack

Only away from home might it be necessary to use the jumper pack.  I think you might be able to use a 12v socket (dash or boot) with a suitable lead.

  • Like 1
Link to comment
Share on other sites

2 hours ago, Roy124 said:

Chas, good question. It would depend on how tight a fit your car is on your garage.  I assume you can open your car door to get in and out.  If it is you can pop the bonnet lock.  Your next problem would be accessing the fuse box on the near side of the engine.  If you can they you can connect the battery pack jump leads.

However your question prompts another solution. Attach the jumper pack to the charger tail off the battery.  However if you have  a charger that you can connect to the fuse box terminal or the battery tail you should not need to use the jumper pack

Only away from home might it be necessary to use the jumper pack.  I think you might be able to use a 12v socket (dash or boot) with a suitable lead.

@Roy124 thanks I am using the terminal under the bonnet to charge the Battery. Enough room to get round the car.

I have got the ctek 5 leads plus the BM2 monitor which I may fit myself.

@Max_Headroom thanks, I had thought of using skates (£65/pair) but i did wonder if anyone had an easier solution. Maybe the AA/Rac carry skates in their vans.

https://www.halfords.com/tools/garage-equipment/garage-essentials/halfords-pair-wheel-dollies---500kg-541782.html?istCompanyId=b8708c57-7a02-4cf6-b2c0-dc36b54a327e&istFeedId=367c5610-f937-4c81-8609-f84582324cd6&istItemId=pmmaxplat&istBid=t&_$ja=tsid:|cid:17363835999|agid:|tid:|crid:|nw:x|rnd:10563135687276706580|dvc:m|adp:|mt:|loc:9046084&gad_source=1&gclid=CjwKCAiA1fqrBhA1EiwAMU5m_0euOnuFyilmxQequuVp7w8SEejgCveutrmcR9SQU549la3uylkXZxoCiKwQAvD_BwE

Link to comment
Share on other sites

5 hours ago, Chas G said:

If for some reason the car won't go into "ready" mode, how on earth would I or anyone else be able to get it out of the garage for recovery.

Reverse car into garage? Easy to access fuse box / boost connector.

I fitted a 12v socket in the Battery cover under rear seat that can be used for charging or for connecting a boost pack.

IMG_7112.thumb.jpeg.94eba90fbba98e04ca761c794ac0e015.jpeg

  • Like 3
Link to comment
Share on other sites

Latest Deals

Toyota Official Store for genuine Toyota parts & accessories

Disclaimer: As the club is an eBay Partner, The club may be compensated if you make a purchase via eBay links

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share







×
×
  • Create New...




Forums


News


Membership


  • Insurance
  • Support