Leaderboard

Nice, looking forward to see the thread. If someone's keen on buying a set of springs I will be probably selling mine any time soon. Same H&R -35mm for petrol Auris. Waiting for new parts to upgrade the suspension at the moment :)

Googled P0355 Toyota highlander (2007) - Faulty Ignition Coil 5 - Ignition Coil 5 harness is open or shorted - Ignition Coil 5 circuit poor electrical connection - Faulty Engine Control Module (ECM) Pull the plug off the Ignition coil (on top of the spark plug) on No.5 cylinder and re-attach it see if that helps.

Personally I would not mess at all with the CVT gearbox !

pass the wiper arm under the bar at the back of the clip then hook it on the blade,the bar will then lock onto the arm

No as long as the service schedule is maintained it will be fine Sent from my HTC One SV using Toyota OC mobile app

No. Can i suggest you close the bonnet and step back. Go get professional advice if there is something needing doing to the gearbox. What are you doing to the Multidrive/CVT and why, is there some fault, or is it you intending doing a service, ? and possibly/likely invalidating your Original Manufacturers Warranty. george

Presume the predicted life of the tyre repair can has something to do with an expected loss of propellant over a period of time, rather than the sealant becoming ineffective. Suppose the expiry date is from the manufacturing date of the car, rather than the first registration date.

Oh no. Not THAT topic again.

You need to change the SMT leds mounted behind the fuel/mileage display to change the LCD colour to which ever colour you fancy. I've done mine blue which seems to be a common choice but I've seen lots of different colours used before, white looks good imo. You do need basic soldering skills tbh but it's well within most peoples capabilities. Have a look HERE for a diy guide, it also shows which leds need to be swapped for the speedo & tach, these are orange as stock but need to be changed to white if you fit a custom gauge face (there's a group buy running for these on c-cuk incidently). I changed the speedo/tach ones to blue which look white at night through the oem orange gaugeface & a couple of red ones to light up the redline. The stock SMT (surface mount) leds are 3528's so just buy whatever colour you want from a led supplier or ebay, cheap as chips ;) http://cgi.ebay.co.uk/50PCS-3528-PLCC-2-SM...#ht_2256wt_1046