Leaderboard

Hello All. My name is Rafeeq and i live in Manchester. I have recently become the proud owner of a MK 3 W Reg Toyota MR2 Roadster which i picked up from Coventry a few days ago. I look forward to interacting more on this forum with everyone and have attached my car for you to enjoy. :)

Put your hand over the end with the engine running. The pressure should build up and release when you let go. If it's blowing you'll hear it. Watch it'll be hot, use a rag or something.

Hi and welcome. Very nice car. Wonder if I can fit my wife and 3 kids in there somewhere??!!

Welcome to the forum! Great car you have there.

Went to have a look today but it had been resprayed on the rear 1/4 panel and the bumper didn't fit properly so decided not to bother. Thanks for the help and advice

I have the 170 piece, make sure you use your toyota discount card you will get 15% off that price. only downside of these sets for me is that I do not use the imperial sockets as all my cars are Toyota.

Just made the change from a 2005 to a 2009. 2009 has a bigger interior with lots of room. But I miss the massive boot space of the 2005.

At the end of the day a customer bought the Anniversary model for about £25,000 and yet they expected to accept rusty wheel nuts after just over 3 years? Come on Toyota! Maybe on a £7k base model Aygo, but not on a range topping limited edition car! If Toyota can't support a customer paying £25k for car over a set of wheel nuts, then that speaks volumes. And if Toyota UK can't afford a 5 year warranty, then they should stop pretending and go back to offering 3 years.

Ordered something interesting, a wide angle mirror... Which is not just a mirror... It is DOD RX8W mirror with integrated display and it can be used as a dash cam In case someone's interested, I ordered it from official DOD distributor in Lithuania. Spent a lot of time searching for shops where it's available as it's still quite new product. In that shop the price was cheapest and customer service just great. They even offered me free shipping :) Now waiting for my new mirror dash cam and will be hardwiring it after it's arrival. Stay tuned for real pics and first impressions! If someone has good suggestions on how to route the power wire to the mirror I will be glad to hear suggestions/see instructions. Credits for help on understanding the camera basics go to Darksta. Cheers for answering all my stupid questions mate! :D

Sounds like your disc may not be sitting flat enough on the hub, take it off make sure to give it a good scrub with a wire brush and re fit, never put any kind of copper grease or anything else between the disc and hub as it can make the disc not sit flat, and sometimes just moving the disc around a wheel stud or two can eliminate the problem.

Sorry to say this but it sounds like he's talking cods wallop! Lambda sensor has nothing to do with the steam clean, although if water gets into it it may mess something up, very unlikely. The lambda sensor light comes on when it needs changing, which it being a 2002 model would happen, due to its age. EML does not come on because of steam clean.